 |
|
|
 |
|
 |
| |
|
 |
|
EcoboardŽ is available in a variety of stock sizes and colors Stock sizes include: 2x2, 2x4, 2x6, 2x8, 2x10, 5/4x6, 4x4, 6x6, 3x10, in lengths up to 18 feet. 5/4x10, 2x10 & 3x10 Boards available in Tongue & Groove (for waterproof, acoustical, & seawall applications.) Available in Slate Gray, Sandstone Brown and Redwood. Customized sizes & colors upon request.
EcoboardŽ is independently lab tested to insure quality & consistency. Detailed reports on physical and mechanical properties are available upon request.
| Description |
EcoboardŽ |
Wood |
Concrete |
| Low Maintenance |
Yes |
No |
No |
| Resilient |
Yes |
No |
No |
| Designer Colors |
Yes |
No |
No |
| Ecologically Friendly |
Yes |
No |
No |
| Never Paint/Resurface |
Yes |
No |
No |
| 100% Recyclable |
Yes |
No |
No |
| Rot Proof |
Yes |
No |
No |
| Saltwater proof |
Yes |
No |
No |
| Slip resistant |
Yes |
No |
Yes |
| Splinter and chip proof |
Yes |
No |
No |
| Termite proof |
Yes |
No |
Yes |
| Water proof |
Yes |
No |
No | | |
|
|
|
Colors & Sizes |
| White |
|
 |
| Slate Gray |
|
 |
| Sandstone Brown |
|
 |
| Mission Brown |
|
 |
| Montana Tan |
|
 |
| Cedar |
|
 |
| Redwood |
|
 |
| Charcoal Gray |
|
 | |
|
EcoboardŽ comes in four standard colors; Slate Gray, Charcoal Gray, Sandstone Brown and Redwood. Optional colors include White, Mission Brown, Montana Tan, and Cedar*.
*EcoboardŽ will have a slight color variation due to the manufacturing process.
EcoboardŽ is available in the following sizes:
| Decking Boards |
5/4 x 6 to 12', 2 x 6 to 16', 2 x 8 to 16', 3 x 8 to 16' |
| Railing Boards |
2 x 2 to 10', 2 x 4 to 12' |
| Bulkheading Boards |
5/4 x 10 to 12', 2 x 10(TG) to 18', 3 x 10(TG) to 18', 6 x 8 to 16', 10 x 10 to 20', 8 x 10, 8 x 12, 12 x 12 |
| Landscaping Boards |
4 x 4 up to 12', 5 x 5 up to 16', 6 x 6 up to 16' | | |
|
|
|
Technical Data
Additives to ensure U.V. Stabilization and Flame Retardency may total no more than 2%
ECOBOARDŽ is independently lab tested to insure quality & consistency. Detailed reports on physical and mechanical properties are available upon request.
| NON REINFORCED PLASTIC LUMBER |
| PROPERTY |
TEST |
Measurement Results |
| Abrasion Test |
ASTM D4060 |
0.42 g Weight Loss |
| Abrasion Test (Tabor tester 100 hrs.) |
CS 17 |
1.01 in3 (16.55 m3) |
| Absorption (Diesel Fuel) |
ASTM 543 |
0.677 % Weight Increase |
| Absorption (Gasoline) |
ASTM 543 |
1.362 % Weight Increase |
| Absorption (Sea Water) |
ASTM 543 |
0.116 % Weight Increase |
| Brittleness |
ASTM D746 |
No Break @ -40oC @ 267 m-N/m |
| Bulk Density |
*ASTM D611 |
60.12 lb/ft3 (963 kg/m3) |
| Coefficient of Friction (Neolite-wet) |
ASTM C1028 |
0.71 |
| Coefficient of Friction (Neolite-dry) |
ASTM C1028 |
0.64 |
| Coefficient of Thermal Expansion |
ASTM D6108 |
0.0000411 in/in/0F |
| Compressive Strength (perpendicular to grain) |
*ASTM D6108 |
1,100 psi |
| Compressive Strength ([parallel to grain) |
*ASTM D6108 |
2,100 psi |
| Flammability (Flash Point) |
|
6600F (3500C) |
| Hardness |
ASTM D2240 |
72 Shore D |
| Impact Resistance |
ASTM D746 |
325 m-N/m |
| IZOD Impact |
ASTM D256 |
4.54 ft lbf/in. |
| Melting Point |
|
Melt @ 2710F (1330C), Softens @ 2610F (1270C) |
| Nail Withdrawal (Surface) |
*ASTM D6117 |
281 lb (104 kg) |
| Screw Withdrawal (Surface) |
*ASTM D6117 |
490 lb (183 kg) |
| Specific Gravity (Skin) |
ASTM D792 |
from 0.93 to 0.90 |
| Specific Gravity (Core) |
ASTM D792 |
from 0.66 to 0.88 |
| UV Resistance |
ASTM D4329 |
<1% Change after 500 hrs |
| Flexural Modulus (call for specific profile sizes) |
*ASTM D6109 |
> 150,000 psi |
| Maximum Fiber Stress in Bending |
*ASTM D6109 |
> 2,000 psi |
|
FIBERGLASS FILAMENT REINFORCED PLASTIC LUMBER |
| PROPERTY |
TEST |
Measurement Results |
| Abrasion Test |
ASTM D4060 |
0.42 g Weight Loss |
| Abrasion Test (Tabor tester 100 hrs.) |
CS 17 |
1.01 in3 (16.55 m3) |
| Absorption (Diesel Fuel) |
ASTM 543 |
0.677 % Weight Increase |
| Absorption (Gasoline) |
ASTM 543 |
1.362 % Weight Increase |
| Absorption (Sea Water) |
ASTM 543 |
0.116 % Weight Increase |
| Brittleness |
ASTM D746 |
No Break @ -40oC @ 267 m-N/m |
| Bulk Density |
*ASTM D611 |
60.12 lb/ft3 (963 kg/m3) |
| Coefficient of Friction (Neolite-wet) |
ASTM C1028 |
0.71 |
| Coefficient of Friction (Neolite-dry) |
ASTM C1028 |
0.64 |
| Coefficient of Thermal Expansion |
ASTM D6108 |
0.0000411 in/in/0F |
| Compressive Strength (perpendicular to grain) |
*ASTM D6108 |
1,960 psi |
| Compressive Strength ([parallel to grain) |
*ASTM D6108 |
3,560 psi |
| Flammability (Flash Point) |
|
6600F (3500C) |
| Hardness |
ASTM D2240 |
72 Shore D |
| Impact Resistance |
ASTM D746 |
325 m-N/m |
| IZOD Impact |
ASTM D256 |
4.54 ft lbf/in. |
| Melting Point |
|
Melt @ 2710F (1330C), Softens @ 2610F (1270C) |
| Nail Withdrawal (Surface) |
*ASTM D6117 |
281 lb (104 kg) |
| Screw Withdrawal (Surface) |
*ASTM D6117 |
490 lb (183 kg) |
| Specific Gravity (Skin) |
ASTM D792 |
from 0.95 to 1.04 |
| Specific Gravity (Core) |
ASTM D792 |
from 0.70 to 0.98 |
| UV Resistance |
ASTM D4329 |
<1% Change after 500 hrs |
| Flexural Modulus (call for specific profile sizes) |
*ASTM D6109 |
> 300,000 psi |
| Maximum Fiber Stress in Bending |
*ASTM D6109 |
> 3,000 psi |
|
NOTE: (*) denotes recommended test by the "Plastic Lumber Trade Association" PLTA
The results of the Tests detailed above were conducted by an independent certified laboratory, and listed for general information purpose only. Ecoboard does not take responsibility for the interpretation and application of the above information, unless Ecoboard provides this information to the user in writing for a specific application. | | | |
| |
| |
| Home | What Is Ecoboard? | Compare | Specifications | Installation | Where Can You Buy? |
| Copyright 2005 Trelleborg, Inc. All rights reserved |
| |
